In this task, you
are going to edit the diameter of the pocket belonging to CRIC_BRANCH_3. You will see
how this edition affects the part you created in the previous task.
1.
2.
Double-click
CRIC_BRANCH_3 to access the Part Design workbench.
Select Pocket.2 and use the Pocket.2 object -> Edit Parameters contextual command to display the associated
parameters.
3.
Double-click D11 in the geometry area to
display the Constraint Edition dialog box.
4.
Enter 20 as the new diameter
value and click OK to generate the new pocket.
5.
Update Product1 by double-clicking
on Product1 in the specification tree.
The pocket is
modified accordingly. The coincidence previously set between the two parts is
maintained.
This result is made possible thanks to the option Keep link with selected
Object you set at the very beginning of the scenario.
