View Creation

	The Generative Drafting workbench provides a simple method to create views on a predefined sheet.
	In this chapter, most of the tasks illustrate how to create views from parts. These views can also be created from assemblies (exploded or not). We voluntarily decided to illustrate these views only created from assemblies whenever specific points needed to be mentioned.
	Note that threads are also generated on the condition they are defined on 3D holes.

	Before you Begin You should be familiar with important concepts.
	Create a front view Use a reference plane on the 3D part to create a front view. If needed, use the manipulator to assign the right position to the view.
	Create projection views Use the green frame to automatically generate the projection views as desired.
	Create an unfolded view Create an unfolded view from a Sheet Metal part.
	Create an FD&T view Generate a view and the associated annotations from the 3D.
	Create an auxiliary view Define a plane that will be used to generate the auxiliary view.
	Create an offset section view Use a cutting profile to define and position the offset section view.
	Create an offset section cut Use a cutting profile to define and position the offset section cut.
	Create a section view (Planar Surface) Use a cutting profile to define and position the offset section view.
	Create a section cut (Planar Surface) Use a cutting profile to define and position the offset section view.
	Create an aligned section view Use a cutting profile to define and position the aligned section view.
	Create an aligned section cut Use a cutting profile to define and position the aligned section cut.
	Create a section view with profile defined in 3D Create a section view using a 3D profile as cutting plane.
	Create a section cut with profile defined in 3D Create a section cut using a 3D profile as cutting plane.
	Create a detail view Use a callout to create a detail view via a boolean operator from the 3D.
	Create a detail view profile Use a polygon to create a detail view via a boolean operator from the 3D.
	Create a quick detail view Use a callout to create a detail view by computing the view directly from 2D projection.
	Create a quick detail view profile Use a polygon to create a detail view by computing the view directly from 2D projection.
	Create a clipping view Create a clipping view with a circle as callout.
	Create a clipping view profile Create a clipping view with a sketched profile as callout.
	Create an isometric view Create an isometric view using a 3D part.
	Generate an exploded view Create an isometric view, and then, projected views from an assembly previously exploded via Digital Mock-up workbench (DMU Navigator).
	Create a broken view Create a broken view from an active and up to date generative view using two profiles corresponding to the part to be broken from the view extremities.
	Create a breakout view Remove locally material from an left generated view, in order to visualize the remaining visible internal part.
	Create views via the wizard Create views using a wizard by defining options in the Pre-Defined Configurations dialog box.
	Create views via the wizard Automatically create front, bottom and right views using a wizard.
	Create views via the wizard Automatically create front, left and top views using a wizard.
	Create views via the wizard Automatically create all the views using a wizard.
	Generate CGR views Generate views using the CGR data format.